Details Introduction about Steam Autoclave
Steam autoclave is a remarkably versatile large volume, heavy weight of large pressure vessels. It is mainly used in the process of conservation and autoclaved sand-lime brick, fly ash brick, aerated concrete block, concrete pipe pile, ALC plates and other building products. Make building products obtained after steam curing high strength. Advantages of these products are environmentally friendly, energy-saving, safe and can improve the efficiency of the production of products.
Steam autoclave working pressure 1.3MPa and 1.5MPa generally two types of low-pressure vessel but his bulky, big pressure and volume of the product belong to the danger of bursting pressure vessel, according to "Stationary Pressure Vessel Safety Technical Supervision Practice "category, below Ⅰ, Ⅱ, Ⅲ class pressure vessel.
The main raw materials of steam autoclave: Steel Q345R, use 16MNii overall forged kettle body flange, tank cover flange. Rail Steel Carbon Steel 55Q (12kg / m, 15kg / m, 22kg / m, 30kg / m)
Steam autoclave Format: Autoclave accordance with the overall structure of the far end of non-and-through; in accordance with the kettle cover open modes: side door type, the opening ceremony. Kettle lid open the way into the manual door, electric door, hydraulic door.
Working medium of steam autoclave is saturated water vapor. The following general diameter 2.25 m working pressure autoclave 1.3MPa, the design pressure of 1.4MPa, working temperature 195.0 ℃, the design temperature is 198.3 ℃; diameter 2.5 m above the autoclave working pressure of 1.5MPa, the design pressure of 1.6 MPa, working temperature is 201.4 ℃, the design temperature is 204.3 ℃.